Outils pour utilisateurs

Outils du site


public:a_perfect_btrfs_server

A "perfect" btrfs server

This is nearly the title of a fine article (signed by Mr Technology…) and my notes of its implementation.

It is tested only on legacy boots, and is known not to work as is on some UEFI boots.

The interest of btrfs is big, and many good articles explain it, but I have not found good articles on its implementation on debian. The server is based on a debian with 2 RAID1 2T disks.

Install basic debian

Let us start to install the system from debian-9.1.0-amd64-netinst.iso (on a flash USB key in this case). I skip here standard install procedures but,on the partition menu, create a main btrfs partition on the whole first disk, add the boot flag, mounted on /. On the second disk create a partition as on the 1rst disk but declare it of type “not in use”,but with the boot flag. Do not declare any other partition. Finish the installation normally.

As is, my system refused to boot, but with the USB key mounted, the system boots… And I had to :

grub-install /dev/sdX1
apt install --reinstall grub-pc

and then it boots.

We have now a basic server with btrfs file system.

Build the RAID1

We note /dev/sda and /dev/sdb the two disks, but it may differ on other systems.

If not soon done, add the boot flag now with fdisk to the second disk. Then add the 2nd disk to / and build the RAID:

apt update
apt install btrfs-tools
btrfs device add /dev/sdb1 /
btrfs balance start -v -mconvert=raid1 -dconvert=raid1 /

You can use btrfs display commands to see the sitation all along :

btrfs fi show
sudo btrfs fi usage /

Various inits

I suggest to modify les logs dans /etc/systemd/journald.conf :

Storage=persistent

See : https://guillaume.fenollar.fr/blog/journald-tutoriel-journald-journalctl/

Add zram based swap

Ubuntu policy is to assign half of the memory to swap and divide it by the the number of CPU hearts.

apt install zram-tools

You should modify ALLOCATION to 33-50% or total RAM in /etc/default/zramswap

Install lxd

The interest of “containers” is great to isolate problems. I have choosen LXD. To say it simply, LXD is magic… Thanks to the developper team.

Prepare the bridge

Create a simple bridge :

apt install bridge-utils

In /etc/network interfaces, here based on enp5s0 (not wan) interface :

# The loopback network interface
auto lo
iface lo inet loopback



# The primary network interface
auto enps5s0
iface enp5s0 inet manual


auto br0
iface br0 inet static
        address 192.168.163.1
        netmask 255.255.255.0
        gateway 192.168.163.254
        network 192.168.163.0
        broadcast 192.168.163.255
        bridge_ports enp5s0
        bridge_stp on
        bridge_maxwait 0
        
iface enp5s0 inet6 auto        

Install lxd from snap

apt install snapd
snap install lxd

Logout, then log in again, then init lxd.

Initialize LXD

Default values are usually good (btrfs…), but do not declare any network but add br0 “manually” after, then add your user to lxd group :

lxd init
[...]
lxc network attach-profile br0 default eth0
adduser myuser lxd

Now myuser can manipulate containers :

lxc launch images:debian/stretch debian
lxc config device  override debian eth0 hwaddr=02:1E:62:00:00:36 (recommended)
lxc config set  debian  volatile.eth0.hwaddr  00:1e:62:00:00:43 (not recommended)

lxc start debian
lxc exec  debian bash
...

It is possible to choose to work as root in the containers as they are isolated from the host.

Containers LXD

Backup

lxc export pgsql /media/lxd_containers/pgsql2020_01_12.tar.gz

After import, the container is on stopped state :

lxc import  /media/lxd_containers/pgsql2020_01_12.tar.gz

Use simple mail in server or containers

nullmailler

Bien

msmtp
apt install msmtp msmtp-mta

Et /etc/msmtprc :

account default
host 192.168.13.36
auto_from off
from container_name@couderc.eu
syslog LOG_MAIL
Data access
/var/snap/lxd/common/mntns/var/snap/lxd/common/lxd/storage-pools/default/containers/

Maintenance

In case of failure, prevent the problem by having a 3rd empty disk ready…

To replace :

btrfs fi show
btrfs replace start -rf /dev/sdb2 /dev/sda2 /
public/a_perfect_btrfs_server.txt · Dernière modification : 2021/11/19 08:56 de pcouderc

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki